Fiberall Technology (Shenzhen) Co., Ltd
Fiberall Technology (Shenzhen) Co., Ltd
Add to Cart
FA-FDR2MD48B-SX, 2U Rack Mounted Fiber Patch Panel Big Capacity Fiber Optic Terminal Box 48Fibers
The material of fiber optic patch panel, such as texture, thickness and spraying material, is the most important factor determining the cost of optical fiber patch panel. How to make judgement and selection when choosing rack mounted fiber optic patch panel? A good quality fiber path panel should have the following characteristics on the material:
1, corrosion resistance: all materials used on fiber distribution frame should have anti-corrosion properties, for example, should not use preservatives to achieve material corrosion resistance; physical and chemical properties must be stable, and the sheath of fiber optic pigtail or fiber cable, in order to prevent corrosion and other damage, corrosion resistant materials must be used.
2, antirust: there is no apparent rust on the metal surface after 48 hours of salt spray test on the fiber optic patch panel.
3, coating processing requirements: when coating on metal structure, coating and substrate should have good adhesion, adhesion can not lower than two requirements in China GB/T9286 standard form I: in the cross section of the gap, or cut off from the edge of the coating, the affected section cutting area is greater than 5%, but not significantly more than 15%.
4, combustion performance requirements: the combustion performance of non metal structural parts and fiber optic patch cord equipment should meet the following conditions:
1) The test samples can not be ignited.
2) For ignition samples with ignition time greater than 10s, flammable or heated particles falling from the test samples will not burn at the bottom of the scattered test samples.
Main Parameters Of 2U Fiber Optic Patch Panel
| Part Number | FA-FDR2MD48B-SX |
| Installation Type | Rack Mounted |
| Structure Type | Sliding Drawer |
| Application Environment | Indoor Standard 19” rack |
| Sheet Material | Cold Rolled Metal Sheet |
| Fiber Capacity | 48 Fibers |
| Adapter Panel Type | Metal |
| Adapter Port | SC Simplex |
| Fiber Pigtail | SC 0.9mm |
| Body Color | Black |
| Order options | Empty, half loaded or full loaded |
| Size | 2U height 19 inch width |
| Customized Paint/Print | Available |
| OEM/ODM | Available |
Main Features
High quality cold rolled steel plate, all CNC machining, surface using static ink-jet, beautiful and durable;
Full front operation;
Full frame structure;
The front and back cables entries are more convenient to operate;
Left and right winding wheel;
A variety of fiber optic adapters and fiber tray available for selection;
various facade panels for selection;
With complete accessories.