Fiberall Technology (Shenzhen) Co., Ltd
Fiberall Technology (Shenzhen) Co., Ltd
Add to Cart
FAPC-SALPS2 , Single Mode G652 Fiber Optic Patch Cord Duplex With LC To SC Connector
Main Technical Parameters Of Fiber Optic Jumper And Fiber Optic Pigtail
IL : Insertion loss is the most important parameter of fiber optic jumper, it refers to the loss of loaded power, happened somewhere in the transmission system due to the insertion of components or devices, it is the ratio of power before the insertion of the components or devices and after the insertion of the components or devices.
RL : Return loss is also a very technical or judge the quality of fiber optic pigtail and patch cord, it is the ratio of the reflected wave power to the incident wave power in the transmission line, which is expressed in logarithmic form. The unit is dB, which is generally negative, its absolute value can be called the reflection loss.
Repeatability, means to test the fiber optic jumper repeatedly under the same condition, the absolute difference of the two test results ( loss value ) is less than or equal to the probability of 95%.
Mating times : Means within the mating times limit, the fiber patch cord or pigtail can keep the performance in good condition.
Maximum tensile strength : means material resistance of uniform plastic deformation, the deformation is uniform before it meets the maximum tensile stress, but when the tensile beyond maximum tensile stress, the metal material will appear necking phenomenon means concentrated deformation; as for materials without (or very small) uniform plastic deformation, it reflects fracture resistance of the material.
Crush resistance : The strength limit when the external force is applied.
Dynamic bending radius and static bending radius of optical fiber jumper : Dynamic bending radius is that the bending radius of the optical fiber is not less than 20 times of the outside diameter of the optical fiber cable. Static bending radius of the optical fiber is at rest and the bending radius is 15 times the diameter of the optical fiber cable.
Product Parameters Of FAPC-SALPS2 Fiber Jumper
| Item | Parameters |
| Product Spec | Fiber Optic Jumper Duplex Single mode LC/PC - SC/APC 2.0mm |
| Jacket Material | PVC or LSZH |
| Fiber Type | Single Mode G652B or G652D |
| Test Wavelength | 1310nm, 1550nm |
| Insertion Loss | Typical ≤0.20dB,Maximum ≤0.30dB |
| Return Loss | UPC≥50.0dB,APC≥60.0dB |
| Durability | Mating 1000 times,typical change ≤0.20dB |
| Cable Diameter | ∮0.9mm/∮1.8mm&∮2.0mm /∮3.0mm |
| Ferrule Diameter | ∮2.5mm:SC, ∮1.25mm:LC |
| Boot Color | LC boot: White , SC boot: Green |
| Working Temperature | -20℃ to 70℃ |
| Storage Temperature | 40℃ to 85℃ |
| Ferrule Parameter | Bore diameter:125.3+1/-0μm, concentricity : ≤1.0μm |
Applications
1, Active device terminal
2, Fiber access network
3, Telecommunications long-distance optical transmission network
4, Data communication network
5, Optical measuring instrument
6, Local area network (LAN)
7, Optical fiber CATV
8, Optical fiber data transmission
9, Test equipment
10, Suitable for optical cable transmission network ODF frame, optical transmission equipment connection
11, Gigabit data network
12, Medical equipment
13, Other industrial and military applications