Fiberall Technology (Shenzhen) Co., Ltd
Fiberall Technology (Shenzhen) Co., Ltd
Add to Cart
FA-TC901F13-40, 155Mbps 1x9 Fiber Optic Transceiver With Dual Fiber FC Connector 1310nm 40KM
Fiber optic transceiver consists of optoelectronic components, functional circuits and optical interfaces. The optoelectronic component include two parts: transmitting and receiving. The transmitting part is: input electric signal with certain code rate, processed by internal drive chip and drive LD or light emitting diode (LED) emitting light and send modulation optical signal with corresponding rate, it is with internal automatic control circuit for optical power and it ensure the stable power of output optical signal. The receiving part is that a optical signal with certain bit rate is input into the module and converted into an electric signal via an optical detection diode. Output electrical signals with corresponding bit rate via amplifier, generally the output signal is PECL level. At the same time, an alarm signal is output when the input light power is less than a certain value.
Features Of FA-TC901F13-40
155Mbps 1310nm 40km
Standard industrial 1×9 package
Standard FC connector
Compliance with FDDI PMD Standard
3.3V DC single power supply
Difference LVPECL inputs and outputs
RoHS compliant
Operating Temperature 0~70℃
Suitable applications: SONET OC-3/ SDH STM-1 Equipment, Fast Ethernet, Optical access network and so on.
Pin Description
| 1 | Receiver Signal Ground | |
| 2 | Receiver Data Out | O N .C. |
| 3 | Receiver Data Out Bar | |
| 4 | Signal Detect | |
| 5 | Receiver Power Supply | Top View |
| 6 | Transmitter Power Supply | |
| 7 | Transmitter Data In Bar | |
| 8 | Transmitter Data In | O N.C. |
| 9 | Transmitter Signal Ground |
| PIN | Name | Function/Description |
| 1 | VEER | Receiver Signal Ground, connect to receiver signal ground plane directly |
| 2 | RD+ | Receiver Data Output, terminate this pin with standard PECL techniques |
| 3 | RD- | Receiver Date Output Bar, terminate this pin with standard PECL techniques |
| 4 | SD | Signal Detect, PECL out |
| 5 | VCCR | Receiver Power Supply-provide +3.3V via the recommended receiver power supply filter circuit. |
| 6 | VCCT | Transmitter Power Supply-provide +3.3V via the recommended power supply filter circuit. |
| 7 | TD- | Transmitter Data In Bar |
| 8 | TD+ | Transmitter Data In |
| 9 | VEET | Transmitter Signal Ground-connect to the transmitter signal ground planed directly |
